Danglers/carabiners

Introducing, The Grangler.

 A couple months ago, soon after my shiny new 3D printer arrived, (yes, yes, need to post about that in details, I know…) with new flashlights, and playing around with carry concepts, I’d found I needed another Prangler. its been my favorite EVER for keychain carry, I have it at 11oclock on a belt loop all the time. Always secure, never a problem, I’ve never lost it off of me, but its the fastest easiest access.

Decided I wanted that for my flashlight, which has for years been caribinered to a belt loop at 9oclock.(southpaw!)
Yes, I’ve played with different carabiners and clips before. Just before this I had gone out and found THE perect caribiner, and also, had splurged for one new Prangler.(looks like that post about caribiners missed being Here… Will try to get it uploaded!)

Whats new now, was I found I needed about 3 more of them. 1 on keys, and one to swap around on 4 or 5 flashlights is a PITA.
But I’m unimployed for the year, and funds are short for Titanium trinkets… For a while now I was going to ask Eng1nerd Designs if he minded If I just made myself another Prangler, maybe in brass or copper. But I couldn’t do it, felt too cheeky.

((ANyone interested in a titanium Prangler, let me know in the comments and I’ll get you in touch with Zach, AKA Eng1nerd ūüôā ))

Also recently, winter had finally caught up to us, and I re-discover another issue, that I’ve had with ‘biners, and now the Prangler; its 0F to 10F out and I’m wearing heavy gloves. I CAN opperate a biner with them, but its annoying. I do the prangler for my keys pretty well, because most places I need them, I can’t get the key I want, or unlock a door with the gloves on.. So gloves off for them is fine.

But for the lights, I’d like to stay gloves on if I can.

Also something else I’ve thought about, is I have NEVER used the Pry feature on the Prangler. Actually thought about grinding the tip off the 2nd one I had just got.

So, you might see where this is heading…

I took what I liked and needed, in basic form from the prangler, added, subtracted, and designed my own belt loop dangler. 

:D

Enter, the Grangler.
G(rippy D)angler.

First was to sit down and copy the Prangler.
and do a test print on my geometry, I wanted the same slot/loop hole size and shape, it works so perfect on the Pranglers.

[‚ÄčIMG]

Then, add and subtract what I need and don’t.
Rounded off the top end, no more pry bar.
Removed the mid and upper holes, since I’ve never hung anything from them, to me it gets too messy/bulky and rats nests too much.

Then, added a wide grip area to that side.
And realizing the holes if nothing else provide grip texture, put them back, but in 1/4″ hex holes.
No I don’t intend to ever use them as a driver, after all its in 3mm plastic… But in a pinch its possible. I just wanted traction.

Voila!

[‚ÄčIMG]
[‚ÄčIMG]

As I went the thickness progressed, from the same as the Pranglers, up a bit, then a little more. The thickest one I have is about 4mm(3.81mm or 0.150″), and I used two different “fill” patterns for strengths… can’t tell any difference, they’re all about the same strength. The narrow side bar on them all is springy side to side(width of the bar), and a little more top to bottom(ie with the thickness) which is still fine. I can pull on both bars as hard as I can sideways(direction it would pull if I snag what ever I have on it) with just the finger grip I can get, I can’t break the sucker off!

[‚ÄčIMG]
[‚ÄčIMG]

The outcome is perfect! The grip is great, even with gloves, they hang just like the Prangler, safe and secure, but easy on and easy off, AND with the gloves on its no hitch whatsoever!! I had been a little worried about the PLA in the cold, but several weeks now of constant use between 30F and -40F, and you figure the only heat these get is anything radiating off my hip… not a lot lol, it never seemed brittle, or anyway I didn’t notice if it was, didn’t seem to bother it at all.

[‚ÄčIMG]
[‚ÄčIMG]
[‚ÄčIMG]

So far I have about a dozen of them on various flashlights, knives, and tools. In 4 different matterials, and almost a dozen colors. PLA and wood fiber PLA, PETG, all work fine. The translucent white ones up above are even Glow In The Dark!

Categories: Adventure Metal Works, custom-made-tools, Customized, Danglers/carabiners, Design, EDC, Engineering & Design, Fabrication, key-chains, New Gear, New Products, OpenSCAD, PETG, PLA, Plastic Parts, Preparedness, Prototypes

New Ti and SS!

New trinkets arrived recently!

Titanium Prangler (gpry bar and key dangler)  and an stainless steel cross.

[‚ÄčIMG]

Old and new,

[‚ÄčIMG]

What I got the new Prangler for, is flashlight carry, so I promptly put it on my Skilhunt.

[‚ÄčIMG]

Might also note that its finer finished there than the first pic. Nothing wrong with Nerdys finish, I just wanted more polished like the first one was. Also Hoping to heat anodize(or even real anodize if I get adventurous) it at some point and wanted a finer sand/semi polish for that. I just went at it with 220 for about 5 minutes.

Cross turned out a lot bigger than I though it was! in a good way!
Had no idea what I was going to put it on when I orered it, just figured why not… FOr now I have it on my house carry/den & bedroom emergency light chain.

[‚ÄčIMG]
Categories: Danglers/carabiners, EDC, key-chains, New Gear, titanium

Blog at WordPress.com.

%d bloggers like this: