Bushcraft

Curly Ferro Rod Handle. OKC22

This months OKC22 challenge is collecting and lighting 5 natural tinders with ferro rod.
I cant stand ferro rods, and dont use them. I find real flint and steel faster and easier! 

As far as I knew,  I didn’t own one, other than the blast match style ine a friend gave me, thats in my ATV hunting gear… cant strike that with the knife.


Then I remembered this little guy I made, a 3/16″ rod set in a muley deer tine with a scraper years ago..

Figured I’d try that, but its a short shower of sparks, and hard to use with a bigger knife..


 Then, I happened  onto pics I had of a bigger ferro rod I’d forgotten. If I still had it. Found it quite by accident after giving up, looking for something else lol.
Was getting ready to remove the handle and replace with something better,  when I got deja vu…

Went and dug around and found the one I started to do that to like 4 years ago… Went ahead and did that one instead.

One of my peeves with these things is the ever epic short grip. So I grabbed a block of curly maple(close enough to the curly oak on the knife) , drew out a design and put a nice sized grip on it.

Wanted as much rod length exposed as possible,  found it a super tight fit in 9/32″ brass tube(hammered  in, it is NOT coming out).   Fit 1/4″ into the tube, then 2″ of the tube set in the wood handle.  Extended the rod reach, and in theory when its used up(if ever) I can remove the stub, add a new rod to the handle.

Could have cut/carved/sanded, but I went and put it in the metal lathe.

Siting here with a first coat of wipe on poly drying. 🙂

Categories: Bushcraft, Custom, Customized, Field gear, Fire Starters, OKC22, Preparedness, Woodwork

Sharpened Bush Knife OKC22

Found my knife I’ve entered in the One Knife Challenge at BCUSA dull as dish water(bopping around fir several years without a sheath)

Got out the stones, went through all 4 up to translucent Arkansas

Much Better

Usually I finish with a trip to the power strop(buffing wheel) but didn’t bother here, it was alrwady verry fine and smooth, no bur to speak of. Don’t need laser fine edge right now, maybe later.. will see how it carves.


I entered this intending to use a new knife I had on order. But then they were delayed,  wasn’t sure if it would come in time… So I chose the Damascus scandi intending to use my one free swap later.


Now I have the other newcone(details to be posted soon), and couls swap, But I think I’m staying with the scandi… I made this knife over 15 years ago, and its had little to no use.. Might as well get to use it,  especially since bushcrafty stuff us what I made it for! 


Need to make a sheath of some sort too. It use to be in a hollowed out elk antler beam and leather deal I made, but the antler warped one winter… Not sure what I’ll do now.

Categories: Adventure Metal Works, Adventures, Bushcraft, Custom, Field gear, GetOutdoors, knives, OKC22, Outdoors, Woods tools

Create a free website or blog at WordPress.com.

%d bloggers like this: