This started as an idea for a contest at printables.com;
Here is also where this model is on that site;
Figured, if Anyone should/could be designing an EDC related item for printing, it would be me, right? 😉
Problem is, I don’t use the things!
I had one idea for this but brushed it off as too… hokey? I dunno, too rediculous in some way.
The more I thought about it, I couldn’t get really entheused about it, because I don’t use the things… I have a specific place I put current carry, its a dump place, but I’ve never done the whole box/tray/ whatever thing, unless I’m house sitting somewhere and need to Create a safe place. Its just not ever been a me thing at home.
But, THEN the more I think about it too, it could be a fun project to model my idea, and who cares if its a little over the top on a theme? So, for the fun of it, Iwent ahead and did it.
I give you, The Alaskan Dump Tray.
Or The Log Cabin Valet tray.
And the Mini version,
I got a little carried away, I have it as a fully parametarized file(As in it runs in the OpenSCAD customizer pane, there all parameters are easy to edit by Anyone with the software, no 3D or coding experiance needed..Poimt and click without editing the model(s)) Can change; The log height(count), log diameter, inner area length and width, turn on or off 1 or 2 inner walls, and move the two inner divider walls around(although they always cross and make 2 compartments equal length… I’m too lazy so far to cut it up and make it 4 walls if wanted), and the inner wall height and log diameter is settable independantly of the main walls, and each other.
The big one Barely fits on my printer, and actually is barely big enough for what I’d want/need.
The little one was a compromise of print time, and space… I can get my average knife, light, multi and watch into it.. Although ironically todays items don’t fit. lol. I printed the little one to have something to take pics for the contest, and because it was only 4 hours to print. The big one would take 7.5 hours, at my coursest resolution.(I printed the small one course for both time, and I figured the rough layers would look better for logs… it does fit I think!)
For this one I went with 3 courses, 10mm dia on the outer walls, and 8mm on the inner wall, seemsed like a good look, and a nice scale. Fresh off the printer!
Some shop gear “EDC” in it;
And, some of today, the basics.
Overall, I’m rather happy with it! Looks like I wanted, and isn’t anything bad like I’d imagined it might end up. I think it came out just fun and interesting, not over the top on “Alaska” or log cabin woodsie LOL.
Looks pretty cool!