Here was last evenings project, started out to just pull a power steering pump bracket that a friend needed…. got a little carried away. 😉
Motor is now totally free, ready to pull once I can borrow an engine hoist(mine has an engine hanging from it…) Motor is blown(two rod bearings have about 1/4″ of play in them!! ) , gonna try to turn it in as a core and make some cash off of it.
And on the EDC topic;
Vic Spirit to cut the starter wires while taking it off, and the large driver as a pry bar tobend out some sheet metal tabs around some bolts.
Impact criver from my caily driver kit to speed/ease some bolt removals.
My Eagletac Ti light was in use for about 2 hours straight, either in hand, or in my mouth while I took out bolts and took off stuff under the truck.
EDCF stockman was used to cut off a rose/sticker bush stem that was growing right where I had to lay my neck/head under the truck… Those dang things are tough to cut but it went through it!
Those sticker bushes are a real pain!