Three models, in two sizes.
3/8” Dia, and 1/2” Dia. +/– ~1/64”–1/32”
Both come out about 5/8” long finished, +/– ~1/16”
Three Models in 1/2” ; The Generator, The 1976(Groovy!) And The Lifter(Barbell)
All have ~(approx.)0.201” Dia. Center hole. Fits loose on Single strand Un-gutter 550, snug on Dual strands Gutted 550, and you Can get Dual strands UN-gutted 550 into them, but its a chore to do.
All are hand turned, IE no CNC, all operations/tool movements by hand. No measurements used in depths, diameters, etc except hole sizes, all others are “eye balled” as I go. SO there is a certain varrance in each piece, no two are 100% exactly the same. Two consecutive beads of one model, of the same run will have a 5% average to 10% max varriance. They are “The Same, Generally” but not “Exactly The Same” 😉
Three Models in 3/8” ; The Generator, The 1976(Groovy!) And The Lifter(Barbell)
The Generator in both sizes;
The ‘1976’ in both sizes;
The Lifter in both sizes;
Length of both compared.
Compared and mixed;
How they sit on one strand of NON gutted 550 cord;